Mectron starlight Pro

Category:

TECHNICAL SPECIFICATIONS

Device compliant to Dir. 93/42/CEE:  Class I
Classification as per EN 60601-1: II
Type B
IP 20 (recharging unit)
IP 22 (handpiece)
Power supply voltage: recharging unit: 100-230 Vac 50/60 Hz 15 VA
handpiece: lithium-ion battery, 3.7 V 1100 mAh
Charging time: About 2 hours
Device for intermittent operation: 120 sec ON 40 sec OFF Max 3 times running
Light source: High-luminosity LED with optics
Class 2 M (IEC 60825-1) LEDs
Dominant wavelength: 440 – 465 nm
LED light emission: > 1.400 mW/cm2
Average life: 1,800,000 cycles, 20 seconds each
Optical fiber: Diameter 8 mm
Composition: Drawn coherent fibers surfused in transparent quartz
Autoclave sterilizable (max. temp. 135°C for 20 minutes – max. 500 cycles).
Exposure: Fast: Exposure time 10 seconds – Acoustic signals indicating start and end of exposure
Slow rise: Exposure time 20 seconds – Acoustic signal at the start, after 10 seconds and at the end of the 20 seconds
The cycles can be stopped or repeated at any time
Operating conditions: from +10°C to +35°C
Relative humidity from 45% to 85%
Pressure of air P: 800hPa/1060hPa
Transport and storage conditions: from -20°C to +40°C
Relative humidity from 45% to 85%
Pressure of air P: 500hPa/1060hPa
Weights and sizes Recharging unit: Weight 555 g
L – W – H 96 x 120 x 58 mm
Starlight pro handpiece: Weight 105 g
L 198 mm, max. Ø 23 mm
Warranty device 3 years

Reviews

There are no reviews yet.

Be the first to review “Mectron starlight Pro”

Your email address will not be published. Required fields are marked *

Scroll to Top